Hydraulic breaker
tools for:

Recommendations
for use

Correct working angle 90º

Do not strike in the same position for more than 15 seconds to avoid overheating.

Avoid empty blows. If the tool does not endorse well or slides on the material to break might cause damage.

BYG Warranty

BYG Hydraulic Breaker Tools, part numbers available:

KB600, KB3000, TEX30H, SBC60, SB50, PB110, SB100 MK2, SB102, TEX75H-100H, SBC115, SB100, TEX110, SBC255, SB150, AT20, BB42, PB160, BB52, PB210, BB62, TEX180, SBC410, SB200, AT170, BB70, TEX 200H, AT220, BB80, PB 310, Atlas Copco PB 420, TEX1800-2000, HBC4000, TEX250H1, MB1600, HM950, SBC610-650, SB300, MB1700, HM1000, MB500, HM-350, HB2200, HM1500, TEX400, SB450, SBC800-850, HB2500, HB3000, HM2100, MB700-800, HM580, HB4200, HM2600, TEX 600-900, HBC1100-1700, HB5800, HM3000, MB1000, HM680, HB7000, HM4000, MB1200, HM780, TEX1400, HBC2500, Beta Breaker Bobcat BB20, HB580, BB30, BB50, BB60, B500, BB70, BB80, B850-950, Bobcat, HB880, B 48, HB380, HB980, Bobcat, BTK (Botruk-Okada) H1180, CB115, BTK (Botruk-Okada), OB008, CB140, OB011, OB130, OB026, OB025, CB180, OB036, OB220, OB035, Canginibenne OB040, H80B, OB050, OB100, Case, CNH Case, CNHCB140, CNH CB32, CB5200, CNH CB550, CB200, CNH CB45, CB6000, CNH CB700, Caterpillar CB620, CNH CB85, CB735, CNH CB120, CNH CB150, CB1450, CB2850, CNH CB200, CNH CB260, H90 CS, CB3750, CNH CB320, CB4000, CNH CB400, H115 CS, Caterpillar, Chicago Pneumatic H120 CS, CP300, H130 CS, CP400-550, H140 CS, H160 CS, CP1150, H170, CP1550, H180, CP1650, H195, CP2250, CP3050, Chicago Pneumatic, CP100, CP4250, CP150, CP200, CJB D&A (DandA), CJB 8V, CJB 634, 15-20V, 30-50V, Continental, RH100, 70V, RH200, RH300, RH600, 150V, RH1100, 180V, RH1500, 220V, RH1700, 300V, Daemo, Dehaco DMB50-500, DHB305, DMB1300, DHB350 S, DMB1800, DHB405, DMB2200-230, DHB805, DMB3000-4400, DHB 1605, DHB 2305, Dehaco DHB55, Demoter DHB75, DM90-95/S85, DHB150S, DM120 / S130, DHB 200S, DM220-40/S230, DHB 105-165, DM160 / S170, Demoter DNB (Daenong) S300-360, D130, D160, DNB (Daenong), Drago K20, DRH80, D25, DRH120, K25, DRH150, D30, DRH180-250, K30, DRH 280, D60, DRH 650-900, D70-90, DRH 1150-1160, D110, DRH1900, Euroram RM45, RM140, RM48, RM145, RM56, RM150, RM65-70, RM160, RM75, RM180, RM80-82, RM195, RM85-90, RM215, RM110, Forcop RM115, RM120, RM130, Furukawa F1-HB 1G, KF1 -KHB 1G, F12, KF12, F2-HB 2G, KF2 -KHB 2G, HB10G, KHB 10G, F3, KF3, F19, KF19, HB100, HB15G, KHB15G, F4-HB 3G, KF4-KHB 3G, F22, KF22, F5, KF5, HB20G, KHB20G, HB200, F27, KF27, F6, KF6, F35, KF35, HB 5G, KHB 5G, HB30G, KHB30G, F9, KF9, HB40G, KHB40G, HB 8G, KHB 8G, F45, KF45, Furukawa, Hanwoo F70, KF70, RHB320, HB50G, RHB322/325, F100, RHB328/330, RHB340, Hanwoo RHB301, RHB350, RBH302, 303V, Hidramec, RHB303, HM801, RHB305, HM802, RHB306, HM803, RHB308, RHB313, Huppi ,Hydraram, SG1800S, SG2100S, SG2500S, SG2800S, SG5000S, Hydraram, Indeco SG200S, HP-UP150, MES 121, SG350S, HP200, MES180, MES300, SG400S, HP-UP350, HP-UP 500, MES521-550, HB5, SG1200S, HP600, UP553, MES553, Indeco HP700, UP650, MES621, HB8, HP7000, MES7000, HP-UP900, HP9000, MES8500, HP1200, MES1200, HB12, HP12000, MES12000, HP1500, MES1500, B19, Italdem, HP1800, MES1750-1800, K80, HP2000, MES2000, HB27, GK85-86, HP2500, MES2500, GK160-161, HP-UP3000, MES3000, K175, HP-UP3500, MES3500, GK210-211, HP4000, MES4000, K270, HP5000, MES5000, SH290-291, Italdem, JCB, K550, HM100-115, GK600-610-620, HM160, GK950-960, HM165, GK1050, HM110, GK1350-1351, HM260, 

Preheat your tool when operating in low temperatures.

Correct lubrication is required. Lubricate the tool regularly wih quality grease.

Do not use the tool as a lever, it might breake your hammer.

BYG tools are guaranteed against defects in steel or raw material. A tool has a material defect when a circle appears in the center of the tool (as shown)